PYQSide ExamsMy practice

Mechanical Properties of Fluids · Question 13

NEET (UG) 2022 (Phase 2)MCQEasy📈 Topic in 38% papers+4−1
1

The terminal velocity of a copper ball of radius 5 mm falling through a tank of oil at room temperature is 10 cm s-1. If the viscosity of oil at room temperature is 0.9 kg m-1 s-1, the viscous drag force is :

  1. 4.23 10-6 N
  2. 8.48 10-3 N
  3. 8.48 10-5 N
  4. 4.23 10-3 N

Answer

(2) 8.48 10-3 N

Solution

By Stokes' law, F = 6 r v

Here = 0.9 kg m-1 s-1, r = 5 10-3 m, v = 0.1 m s-1

F = 6 3.14 0.9 5 10-3 0.1

F = 8.48 10-3 N

Answer: (2)

NEET (UG) 2022 (Phase 2)

Keep practising — Mechanical Properties of Fluids

2

The velocity of a small ball of mass M and density d, when dropped in a container filled with glycerin becomes constant after some time. If the density of glycerin is d2, then the viscous force acting on the ball will be :

  1. 2Mg
  2. Mg2
  3. Mg
  4. 32Mg
NEET (UG) 2021
3

A capillary tube of radius r is immersed in water and water rises in it to a height h. The mass of the water in the capillary is 5 g. Another capillary tube of radius 2r is immersed in water. The mass of water that will rise in this tube is :

  1. 5.0 g
  2. 10.0 g
  3. 20.0 g
  4. 2.5 g
NEET (UG) 2020
4

A small hole of area of cross-section 2 mm2 is present near the bottom of a fully filled open tank of height 2 m. Taking g = 10 m/s2, the rate of flow of water through the open hole would be nearly :

  1. 8.9 10-6 m3/s
  2. 2.23 10-6 m3/s
  3. 6.4 10-6 m3/s
  4. 12.6 10-6 m3/s
NEET (UG) 2019
5

A soap bubble, having radius of 1 mm, is blown from a detergent solution having a surface tension of 2.5 10-2 N/m. The pressure inside the bubble equals the pressure at a point Z0 below the free surface of water in a container. Taking g = 10 m/s2, density of water = 103 kg/m3, the value of Z0 is :

  1. 1 cm
  2. 10 cm
  3. 100 cm
  4. 0.5 cm
NEET (UG) 2019
6

A small sphere of radius 'r' falls from rest in a viscous liquid. As a result, heat is produced due to viscous force. The rate of production of heat when the sphere attains its terminal velocity, is proportional to

  1. r3
  2. r2
  3. r5
  4. r4
NEET 2018
7

A U tube with both ends open to the atmosphere, is partially filled with water. Oil, which is immiscible with water, is poured into one side until it stands at a distance of 10 mm above the water level on the other side. Meanwhile the water rises by 65 mm from its original level (see diagram). The density of the oil is [figure]

  1. 425 kg m-3
  2. 800 kg m-3
  3. 928 kg m-3
  4. 650 kg m-3
NEET 2017
8

Two non-mixing liquids of densities and n (n > 1) are put in a container. The height of each liquid is h. A solid cylinder of length L and density d is put in this container. The cylinder floats with its axis vertical and length pL (p < 1) in the denser liquid. The density d is equal to

  1. \2 + (n - 1)p\
  2. \1 + (n - 1)p\
  3. \1 + (n + 1)p\
  4. \2 + (n + 1)p\
NEET 2016 (Phase 1)
9

A rectangular film of liquid is extended from (4 cm 2 cm) to (5 cm 4 cm). If the work done is 3 10-4 J, the value of the surface tension of the liquid is

  1. 0.250 N m-1
  2. 0.125 N m-1
  3. 0.2 N m-1
  4. 8.0 N m-1
NEET 2016 (Phase 2)
10

Three liquids of densities 1, 2 and 3 (with 1 > 2 > 3), having the same value of surface tension T, rise to the same height in three identical capillaries. The angles of contact 1, 2 and 3 obey

  1. 2 > 1 > 2 > 3 0
  2. 0 1 < 2 < 3 < 2
  3. 2 < 1 < 2 < 3 <
  4. > 1 > 2 > 3 > 2
NEET 2016 (Phase 2)
11

The heart of a man pumps 5 litres of blood through the arteries per minute at a pressure of 150 mm of mercury. If the density of mercury be 13.6 103 kg/m3 and g = 10 m/s2 then the power (in watt) is

  1. 3.0
  2. 1.50
  3. 1.70
  4. 2.35
AIPMT 2015

All Mechanical Properties of Fluids PYQs →

PDFDownload Mechanical Properties of Fluids PYQs as PDF Free, with answer key and a QR code to every solution — print it or study offline⬇
All NEET Physics chapters