Alternating Current · Question 10

An ac current is represented as i = 5 2 + 10 (650 t + 6 ) Amp The r.m.s. value of the current is

1. 10 Amp
2. 5 2 Amp
3. 100 Amp
4. 50 Amp

For ac circuit shown in figure, R = 100 k and C = 100 pF and the phase difference between Vin and (VB - VA) is 90 . The input signal frequency is 10x rad/sec, where 'x' is . [figure]

An inductor of reactance 100 , a capacitor of reactance 50 , and a resistor of resistance 50 are connected in series with an AC source of 10 V, 50 Hz. Average power dissipated by the circuit is W.

An alternating current is represented by the equation, i = 100 2 (100 t) ampere. The RMS value of current and the frequency of the given alternating current are

1. 100 2 A, 100 Hz
2. 50 2 A, 50 Hz
3. 100 2 A, 100 Hz
4. 100 A, 50 Hz

An inductor of self inductance 1 H is connected in series with a resistor of 100 ohm and an ac supply of 100 volt, 50 Hz. Maximum current flowing in the circuit is A.

An electric bulb rated as 100 W - 220 V is connected to an ac source of rms voltage 220 V. The peak value of current through the bulb is:

1. 0.32 A
2. 0.64 A
3. 0.45 A
4. 2.2 A

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). In the light of the above statements, choose the most appropriate answer from the options given below :

1. (A) is true but (R) is false
2. Both (A) and (R) are true and (R) is the correct explanation of (A).
3. Both (A) and (R) are true but (R) is not the correct explanation of (A)
4. (A) is false but (R) is true