Mechanical Properties of Solids · Question 22

A lift of mass 1600 kg is supported by thick iron wire. If the maximum stress which the wire can withstand is 4 108 N/m2 and its radius is 4 mm, then maximum acceleration the lift can take is m/s2. (take g = 10 m/s2 and =3.14)

1. 2.56
2. 3.89
3. 4.32
4. 5.16

The two wires A and B of equal cross-section but of different materials are joined together. The ratio of Young's modulus of wire A and wire B is 20/11. When the joined wire is kept under certain tension the elongations in the wires A and B are equal. If the length of wire A is 2.2 m, then the length of wire B is m.

1. 1.1
2. 2.22
3. 1.21
4. 4.44

Figure represents the extension ( l) of a wire of length 1 meter, suspended from the ceiling of the room at one end with a load W connected to the other end. If the cross-sectional area of the wire is 10-5 m2 then the Young's modulus of the wire is N/m2. [figure]

1. 1.0 1011
2. 2.0 1010
3. 1.0 1010
4. 2.0 1011

The Young's modulus of steel wire of radius r and length L is Y. If the radius r and length L of the wire are doubled then the value of Y

1. increases by two times
2. reduces by half
3. remains unchanged
4. becomes one fourth

Two wires as shown in the figure below, made of steel and have breaking stress of 12 108 N/m2. Area of cross-section of upper wire is 0.008 cm2 and of lower wire is 0.004 cm2. The maximum mass that can be added to pan without breaking any wire is kg. [figure]

1. 56
2. 38
3. 96
4. 5.6

A cube has side length 5 cm and modulus of rigidity 105 N/m2. The displacement produced by a force of 10 N in the upper face of cube is mm.

A copper wire of length 3 m is stretched by 3 mm by applying an external force. The volume of the wire is 600 10-6 m3. The elastic potential energy stored in the wire in stretched condition would be J. (Given Young modulus of copper = 1.1 1011 N/m2)

The increase in the pressure required to decrease the volume ( V) of water is 6.3 107 N/m2. The percentage decrease in the volume is . (Bulk modulus of water =2.1 109 N/m2.)

1. 2 %
2. 3 %
3. 6 %
4. 4 %

A string A of length 0.314 m and Young's modulus 2 1010 N/m2 is connected to another string B of length and Young's modulus both twice of those of A. This series combination of strings is then suspended from a rigid support and its free end is fixed to a load of mass 0.8 kg. The net change in length of the combination is mm. (radius of both the strings is 0.2 mm and acceleration due to gravity = 10 m/s2) (Mass of both strings is to be neglected as compared to the mass of load)

1. 3
2. 2
3. 1.9
4. 1

A metal string A is suspended from a rigid support and its free end is attached to a block of mass M. Second block having mass 2M is suspended at the bottom of the first block using a string B. The area of cross sections of strings A and B are same. The ratio of lengths of strings of A to B is 2 and the ratio of their Young's moduli (YA/YB ) is 0.5. The ratio of elongations in A to B is .

1. 1
2. 4
3. 8
4. 6