PYQSide ExamsMy practice

Semiconductor Electronics · Question 35

NEET 2017MCQEasy📈 Topic in 25% papers+4−1
1

Which one of the following represents forward bias diode ?

  1. [figure]
  2. [figure]
  3. [figure]
  4. [figure]

Answer

(4) [figure]

Solution

A p-n junction diode is forward biased when its p-side (triangle side) is at a higher potential than its n-side (bar side).

In every option the p-side is on the left and the n-side is connected to the right end through R.

(1) -4 V < -3 V reverse biased

(2) -2 V < +2 V reverse biased

(3) 3 V < 5 V reverse biased

(4) 0 V > -2 V forward biased

Answer: (4)

NEET 2017

Keep practising — Semiconductor Electronics

2

In a common emitter transistor amplifier the audio signal voltage across the collector is 3 V. The resistance of collector is 3 k . If current gain is 100 and the base resistance is 2 k , the voltage and power gain of the amplifier is

  1. 15 and 200
  2. 150 and 15000
  3. 20 and 2000
  4. 200 and 1000
Out of syllabusNEET 2017
3

To get output 1 for the following circuit, the correct choice for the input is [figure]

  1. A = 1, B = 1, C = 0
  2. A = 1, B = 0, C = 1
  3. A = 0, B = 1, C = 0
  4. A = 1, B = 0, C = 0
NEET 2016 (Phase 1)
4

Consider the junction diode as ideal. The value of current flowing through AB is [figure]

  1. 10-1 A
  2. 10-3 A
  3. 0 A
  4. 10-2 A
NEET 2016 (Phase 1)
5

A npn transistor is connected in common emitter configuration in a given amplifier. A load resistance of 800 is connected in the collector circuit and the voltage drop across it is 0.8 V. If the current amplification factor is 0.96 and the input resistance of the circuit is 192 , the voltage gain and the power gain of the amplifier will respectively be

  1. 4, 4
  2. 4, 3.69
  3. 4, 3.84
  4. 3.69, 3.84
Out of syllabusNEET 2016 (Phase 1)
6

The given circuit has two ideal diodes connected as shown in the figure. The current flowing through the resistance R1 will be [figure]

  1. 2.5 A
  2. 10.0 A
  3. 1.43 A
  4. 3.13 A
NEET 2016 (Phase 2)
7

What is the output Y in the following circuit, when all the three inputs A, B, C are first 0 and then 1? [figure]

  1. 0, 1
  2. 0, 0
  3. 1, 0
  4. 1, 1
NEET 2016 (Phase 2)
8

For CE transistor amplifier, the audio signal voltage across the collector resistance of 2 k is 4 V. If the current amplification factor of the transistor is 100 and the base resistance is 1 k , then the input signal voltage is

  1. 10 mV
  2. 20 mV
  3. 30 mV
  4. 15 mV
Out of syllabusNEET 2016 (Phase 2)
9

In the given figure, a diode D is connected to an external resistance R = 100 Ω and an e.m.f. of 3.5 V. If the barrier potential developed across the diode is 0.5 V, the current in the circuit will be [figure]

  1. 20 mA
  2. 35 mA
  3. 30 mA
  4. 40 mA
AIPMT 2015
10

The input signal given to a CE amplifier having a voltage gain of 150 is Vi = 2 (15t + 3 ). The corresponding output signal will be

  1. 2 (15t + 5 6 )
  2. 300 (15t + 4 3 )
  3. 300 (15t + 3 )
  4. 75 (15t + 2 3 )
Out of syllabusAIPMT 2015
11

Which logic gate is represented by the following combination of logic gates? [figure]

  1. AND
  2. NOR
  3. OR
  4. NAND
AIPMT 2015 (Cancelled)

All Semiconductor Electronics PYQs →

PDFDownload Semiconductor Electronics PYQs as PDF Free, with answer key and a QR code to every solution — print it or study offline⬇
All NEET Physics chapters
Class 11Units and MeasurementsMotion in a Straight LineMotion in a PlaneLaws of MotionWork, Energy and PowerSystem of Particles and Rotational MotionGravitationMechanical Properties of SolidsMechanical Properties of FluidsThermal Properties of MatterThermodynamics (Physics)Kinetic TheoryOscillationsWaves
Class 12Electric Charges and FieldsElectrostatic Potential and CapacitanceCurrent ElectricityMoving Charges and MagnetismMagnetism and MatterElectromagnetic InductionAlternating CurrentElectromagnetic WavesRay Optics and Optical InstrumentsWave OpticsDual Nature of Radiation and MatterAtomsNucleiSemiconductor ElectronicsExperimental Skills (Physics)