PYQSide ExamsMy practice

Thermal Properties of Matter · Question 5

JEE Main 2026 (Online) 24th January Morning ShiftMCQEasy📈 Topic in 13% papers+4−1
1

A brass wire of length 2 m and radius 1 mm at 27 C is held taut between two rigid supports. Initially it was cooled to a temperature of -43 C creating a tension T in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to 1.4T, is C.

  1. -71
  2. -80
  3. -65
  4. -86

Answer

(1) -71

Solution

Thermal tension in a wire fixed between rigid supports: T = YA

T (fall in temperature from 27 C)

First cooling: 1 = 27 - (-43) = 70 C gives tension T

for 1.4T: 2 = 1.4 70 = 98 C

final temperature = 27 - 98 = -71 C

Answer: (1)

JEE Main 2026 (Online) 24th January Morning Shift

Keep practising — Thermal Properties of Matter

2

A gas of certain mass filled in a closed cylinder at a pressure of 3.23 kPa has temperature 50 . The gas is now heated to double its temperature. The modified pressure is Pa.

JEE Main 2026 (Online) 24th January Morning Shift
3

An air bubble of volume 2.9 cm3 rises from the bottom of a swimming pool of 5 m deep. At the bottom of the pool water temperature is 17 . The volume of the bubble when it reaches the surface, where the water temperature is 27 , is cm3. (g = 10 m/s2, density of water = 103 kg/m3, and 1 atm pressure is 105 Pa)

  1. 2.0
  2. 4.2
  3. 3.0
  4. 4.5
JEE Main 2026 (Online) 23rd January Evening Shift
4

Rods x and y of equal dimensions but of different materials are joined as shown in figure. Temperatures of end points A and F are maintained at 100 and 40 respectively. Given the thermal conductivity of rod x is three times of that of rod y, the temperatures at junction points B and E are (close to): [figure]

  1. 60 and 45 respectively
  2. 80 and 70 respectively
  3. 89 and 73 respectively
  4. 80 and 60 respectively
JEE Main 2026 (Online) 22nd January Morning Shift
5

An aluminium and a steel rod having same lengths and cross-sections are joined to make total length of 120 cm at 30 . The coefficients of linear expansion of aluminium and steel are 24 10-6/ and 1.2 10-5/ , respectively. The length of this composite rod when its temperature is raised to 100 , is cm.

  1. 120.20
  2. 120.06
  3. 120.15
  4. 120.03
JEE Main 2026 (Online) 21st January Morning Shift
6

A gas based geyser heats water flowing at the rate of 5.0 litres per minute from 27 to 87 . The rate of consumption of the gas is g/s. (Take heat of combustion of gas = 5.0 104 J/g, specific heat capacity of water = 4200 J/kg C)

  1. 4.2
  2. 2.1
  3. 0.21
  4. 0.42
JEE Main 2026 (Online) 21st January Morning Shift
7

Water falls from a height of 200 m into a pool. Calculate the rise in temperature of the water assuming no heat dissipation from the water in the pool. (Take g = 10 m/s2, specific heat of water = 4200 J/(kg K))

  1. 0.36 K
  2. 0.23 K
  3. 0.48 K
  4. 0.14 K
JEE Main 2025 (Online) 8th April Evening Shift
8

A wire of length 10 cm and diameter 0.5 mm is used in a bulb. The temperature of the wire is 1727 and power radiated by the wire is 94.2 W. Its emissivity is x8 where x = . (Given = 6.0 10-8 W m-2 K-4, = 3.14 and assume that the emissivity of wire material is same at all wavelengths.)

JEE Main 2025 (Online) 7th April Morning Shift
9

Two cylindrical rods A and B made of different materials, are joined in a straight line. The ratios of lengths, radii and thermal conductivities of these rods are: LALB = 12, rArB = 2 and KAKB = 12. The free ends of rods A and B are maintained at 400 K, 200 K, respectively. The temperature of rods interface is K, when equilibrium is established.

JEE Main 2025 (Online) 7th April Evening Shift
10

Consider a rectangular sheet of solid material of length l = 9 cm and width d = 4 cm. The coefficient of linear expansion is = 3.1 10-5 K-1 at room temperature and one atmospheric pressure. The mass of sheet m = 0.1 kg and the specific heat capacity Cv = 900 J kg-1 K-1. If the amount of heat supplied to the material is 8.1 102 J then change in area of the rectangular sheet is :

  1. 2.0 10-6 m2
  2. 6.0 10-7 m2
  3. 3.0 10-7 m2
  4. 4.0 10-7 m2
JEE Main 2025 (Online) 4th April Evening Shift
11

Pressure of an ideal gas, contained in a closed vessel, is increased by 0.4\% when heated by 1 . Its initial temperature must be:

  1. 2500 K
  2. 25
  3. 250
  4. 250 K
JEE Main 2025 (Online) 3rd April Evening Shift

All Thermal Properties of Matter PYQs →

PDFDownload Thermal Properties of Matter PYQs as PDF Free, with answer key and a QR code to every solution — print it or study offline⬇
All JEE Main Physics chapters